© OpenStreetMap contributors
- Add External Layer
- Upload Shapefile
- Layer Tutorial
- Close
Use the checkbox () to show or hide a layer.
Use the radio buttons () to select a layer to use with the identify function.
- Layers
- Opacity
Available layers
(ctrl+c)
Search for marine data across UK organisations
- API
- How-To
- About
- Contact MEDIN
- Share
Metadata: Mapping Environmental Considerations for Marine Spatial Planning in Wales
Abstract:
Environmental Considerations spatial datasets for marine planning. These datasets are derived from multiple datasets indicating the presence of protected features in Welsh waters. The data is presented on 1 km2 hexagonal grids. Operational phase was considered for all sectors for all feature groups, and includes maintenance activities. The construction phase was only considered for sectors where potential construction impacts are substantially different from those during operation (tidal stream, wave, tidal range, Floating offshore wind and cabling). However, for the Bird feature group, construction phase was only considered for tidal range and cabling. The scoring methodology included three main stages: 1. The occurrence score reflects either the presence or absence, or standardized abundance (where abundance data was available) of features (i.e., species, habitats, or protected sites) and were scored from 1 to 3 on a continuous scale where 1 was the lowest density and 3 the highest for each feature. 2. The conservation importance score is an estimate of the level of protection each feature has based on the legislation that confers a feature protection. It is important to note that all the features included in this work are conferred protection under various legislation and all are important considerations in the planning of developments. This step was scored from 1 to 5. 3. An impact score to reflect potential impacts on features based on the likely pressures generated by each sector was applied for the operational pressures of each of the focus sectors and, separate to this, construction pressures for some sectors. Where there was considered to be a lack of evidence then a higher score was applied. The current approach did not assess specific technologies individually but considered the potential pressures that could originate from a sector and their potential to negatively affect each of the features. This step was scored from 1 to 3. A total score was calculated for each feature in each cell, and these were summed for each 1 km2 hexagonal grid cell, providing a relative ‘environmental considerations’ score for each feature group per sector. The approach taken to the scoring differed slightly between feature groups based on the available evidence
Data holder:
Natural Resources Wales (NRW)
| Other details | ||
| Internal code | Internally assigned metadata identifier | 8870 |
| Title | The title is used to provide a brief and precise description of the dataset such as 'Date', 'Originating organisation/programme', 'Location' and 'Type of survey'. All acronyms and abbreviations should be reproduced in full. | Mapping Environmental Considerations for Marine Spatial Planning in Wales |
| Alternative title | The purpose of alternative title is to record any additional names by which the dataset may be known. | Mapping Environmental Considerations for Marine Planning - Birds.lyr, Mapping Environmental Considerations for Marine Planning - Fish.lyr, Mapping Environmental Considerations for Marine Planning - Habitats Benthic Species.lyr, Mapping Environmental Considerations for Marine Planning - Mammals.lyr |
| File Identifier | The File Identifier is a code, preferably a GUID, that is globally unique and remains with the same metadata record even if the record is edited or transferred between portals or tools. | NRW_DS125499 |
| Resource Identifier | This is the code assigned by the data owner. | 4f4c4942-4343-5764-6473-313235343939 |
| Resource type | The resource type will likely be a dataset but could also be a series (collection of datasets with a common specification) or a service. | dataset |
| Start date | This describes the date the resource starts. This may only be the year if month and day are not known | 2020-01-01 |
| End date | This describes the date the resource ends. This may only be the year if month and day are not known | 2023-03-01 |
| Frequency of updates | This describes the frequency with which the resource is modified or updated i.e. a monitoring programme that samples once per year has a frequency that is described as 'annually'. | asNeeded |
| Abstract | The abstract provides a clear and brief statement of the content of the resource. | Environmental Considerations spatial datasets for marine planning. These datasets are derived from multiple datasets indicating the presence of protected features in Welsh waters. The data is presented on 1 km2 hexagonal grids. Operational phase was considered for all sectors for all feature groups, and includes maintenance activities. The construction phase was only considered for sectors where potential construction impacts are substantially different from those during operation (tidal stream, wave, tidal range, Floating offshore wind and cabling). However, for the Bird feature group, construction phase was only considered for tidal range and cabling. The scoring methodology included three main stages: 1. The occurrence score reflects either the presence or absence, or standardized abundance (where abundance data was available) of features (i.e., species, habitats, or protected sites) and were scored from 1 to 3 on a continuous scale where 1 was the lowest density and 3 the highest for each feature. 2. The conservation importance score is an estimate of the level of protection each feature has based on the legislation that confers a feature protection. It is important to note that all the features included in this work are conferred protection under various legislation and all are important considerations in the planning of developments. This step was scored from 1 to 5. 3. An impact score to reflect potential impacts on features based on the likely pressures generated by each sector was applied for the operational pressures of each of the focus sectors and, separate to this, construction pressures for some sectors. Where there was considered to be a lack of evidence then a higher score was applied. The current approach did not assess specific technologies individually but considered the potential pressures that could originate from a sector and their potential to negatively affect each of the features. This step was scored from 1 to 3. A total score was calculated for each feature in each cell, and these were summed for each 1 km2 hexagonal grid cell, providing a relative ‘environmental considerations’ score for each feature group per sector. The approach taken to the scoring differed slightly between feature groups based on the available evidence |
| Lineage | Lineage includes the background information, history of the sources of data, data quality statements and methods. | The methods used to derive these datasets are based on those used in the Sustainable Management of Marine Natural Resources project: ABPmer, 2020. Sustainable Management of Marine Natural Resources, Ecological Constraints and Opportunities, ABPmer Report No. R.3527. A report produced by ABPmer for Welsh Government. Datasets and methods have been updated and applied to additional sectors. |
| Additional information | This describes relevant references to the data e.g. reports, articles, websites plus other useful information not captured elsewhere. | Murray, L.G., Bloomfield, H. and Skates, L. (2023). Mapping Environmental Considerations for Marine Spatial Planning in Wales: Methodology Report. Natural Resources Wales, Bangor. |
| Related keywords | ||
| Keyword | General subject area(s) associated with the resource, uses multiple controlled vocabularies | Habitats and biotopes |
| General subject area(s) associated with the resource, uses multiple controlled vocabularies | Protected sites | |
| General subject area(s) associated with the resource, uses multiple controlled vocabularies | Species distribution | |
| General subject area(s) associated with the resource, uses multiple controlled vocabularies | marine planning | |
| General subject area(s) associated with the resource, uses multiple controlled vocabularies | Seal abundance | |
| General subject area(s) associated with the resource, uses multiple controlled vocabularies | Habitat extent | |
| Geographical coverage | ||
| North | The northern-most limit of the data resource in decimal degrees | 53.513067 |
| East | The eastern-most limit of the data resource in decimal degrees | -2.608865 |
| South | The southern-most limit of the data resource in decimal degrees | 51.240829 |
| West | The western-most limit of the data resource in decimal degrees | -5.777741 |
| Regional sea | Wales (WLS) | |
| Responsible organisations | ||
| Role | The point of contact is person or organisation with responsibility for the creation and maintenance of the metadata for the resource. | pointOfContact |
| Organisation name | Natural Resources Wales (NRW) | |
| Delivery point | Maes-y-Ffynnon, Penrhosgarnedd, Bangor, Gwynedd, LL57 2DW, Wales | |
| enquiries@naturalresourceswales.gov.uk | ||
| URL | http://naturalresources.wales/?lang=en | |
| Role | The owner is the person or organisation that owns the resource. | owner |
| Organisation name | Natural Resources Wales (NRW) | |
| Delivery point | Maes-y-Ffynnon, Penrhosgarnedd, Bangor, Gwynedd, LL57 2DW, Wales | |
| enquiries@naturalresourceswales.gov.uk | ||
| URL | http://naturalresources.wales/?lang=en | |
| Role | The custodian is the person or organisation that accepts responsibility for the resource and ensures appropriate care and maintenance. If a dataset has been lodged with a Data Archive Centre for maintenance then this organisation is be entered here. | custodian |
| Organisation name | Natural Resources Wales (NRW) | |
| Delivery point | Maes-y-Ffynnon, Penrhosgarnedd, Bangor, Gwynedd, LL57 2DW, Wales | |
| enquiries@naturalresourceswales.gov.uk | ||
| URL | http://naturalresources.wales/?lang=en | |
| Role | The originator is the person or organisation who created, collected or produced the resource. | originator |
| Organisation name | Natural Resources Wales (NRW) | |
| Delivery point | Maes-y-Ffynnon, Penrhosgarnedd, Bangor, Gwynedd, LL57 2DW, Wales | |
| enquiries@naturalresourceswales.gov.uk | ||
| URL | http://naturalresources.wales/?lang=en | |
| Role | The distributor is the person or organisation that distributes the resource. | distributor |
| Organisation name | Natural Resources Wales (NRW) | |
| Delivery point | Maes-y-Ffynnon, Penrhosgarnedd, Bangor, Gwynedd, LL57 2DW, Wales | |
| enquiries@naturalresourceswales.gov.uk | ||
| URL | http://naturalresources.wales/?lang=en | |
| Resource locators | ||
| Locator URL | Web address (URL) that links to the resource | https://datamap.gov.wales/layergroups/geonode:nrw_mecmp |
| Locator name | Name of the web resource | View and Download |
| Locator function | Code that describes the function of the resource. ISO function code chosen from ISO 19115-1 Codelist | information |
| Locator URL | Web address (URL) that links to the resource | https://datamap.gov.wales/capabilities/layergroup/5653/?ows_service=wms |
| Locator name | Name of the web resource | Web Map Service |
| Locator function | Code that describes the function of the resource. ISO function code chosen from ISO 19115-1 Codelist | information |
| Dataset constraints | ||
| 20.1 Limitations on Public Access - Access constraints | This states `otherRestrictions` from ISO vocabulary RestrictionCode and is an INSPIRE/GEMINI requirement. | otherRestrictions |
| 20.2 Limitations on Public Access - Other constraints | This states any limitations on access to the data. Multiple occurences are allowed here. One entry shall be from the INSPIRE Metadata registry and the other free text should be part of the resource `Have specific limitations`. | There are no access restrictions on this data. NRW may release, publish or disseminate it freely. |
| no limitations | ||
| 21.1 Conditions for Access and Use - Use constraints | This states `otherRestrictions` from ISO vocabulary RestrictionCode and is an INSPIRE/GEMINI requirement. | otherRestrictions |
| 21.2 Conditions for Access and Use - Other constraints | This states any constraints on use of the data. Multiple conditions can be recorded for different parts of the data resource. If no conditions apply, then `No condtions apply` is recorded. This uses free text. | Data may be re-used under the terms of the Open Government Licence providing it is done so, acknowledging both the source and NRW's copyright. It is the recipient's responsibility to ensure the data is fit for the intended purpose. |
| This states any constraints on use of the data. Multiple conditions can be recorded for different parts of the data resource. If no conditions apply, then `No condtions apply` is recorded. This uses free text. | Contains Natural Resources Wales information © Natural Resources Wales and Database Right. All rights Reserved. Contains JNCC, Natural England, SNH, UKHO, RSPB, BTO, MCS, Cefas, WG and Ordnance Survey Data. Ordnance Survey Licence number AC0000849444. Crown Copyright and Database Right. | |
| https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/ | ||
| Available data formats | ||
| Data format | Format in which digital data can be provided for transfer | Geographic Information System |
| Version info | ||
| Date of publication | The publication date of the resource or if previously unpublished the date that the resource was made publicly available via the MEDIN network. | 2023-10-24 |
| Harvest date | The date which this record has been (re)harvested from the provider. | 2026-04-19 |
| Metadata date | The date when the content of this metadata record was last updated. | 2026-03-03 |
| Metadata standard name | The name of the metadata standard used to create this metadata | MEDIN |
| Metadata standard version | The version of the MEDIN Discovery Metadata Standard used to create the metadata record | 3.1.2 |