14ddfdf6-0b82-45e2-8ba6-8b1a9fa09a42 English series series 2026-09-08T15:30:25 MEDIN 3.1.2 geoscientificInformation Sedimentary structure SeaDataNet Parameter Discovery Vocabulary 2026-06-19 revision Geotechnics SeaDataNet Parameter Discovery Vocabulary 2026-06-19 revision Pre-Construction engineering The Crown Estate Renewable Energy Development Phases 2012-05-15 revision Agreement for Lease Area The Crown Estate Renewable Energy Development Areas 2012-05-15 revision Soil GEMET - INSPIRE themes, version 1.0 2009-07-31 revision Geology GEMET - INSPIRE themes, version 1.0 2009-07-31 revision SeaDataNet sea areas 2012-11-07 revision North Sea SeaVoX Vertical Co-ordinate Coverages 2020-05-21 revision soil and sediment 2008-08-01T23:00:00 2008-10-23T23:00:00 0.447657201555526 0.52389494189844 53.1644804509372 53.2713172395977 TCE-901 Marine Data Exchange 2008, GEO, Lincs, Geotechnical Investigations Geotechnical Investigations 2009-03-12T00:00:00 creation 2021-05-17T13:46:35 publication English The Lincs Offshore Wind Farm is located approximately 8km off the coast of Lincolnshire, north-east of Skegness and is planned to consist of 69 wind turbines and 1 substation. GEO (Danish Geothechnical Institute) conducted geotechnical site investigations in terms of seabed deployed Piezocone Penetration Testing (PCP) and geotechnical borings for the planned offshore wind farm at Lincs. The boring campaign included in total 45 boreholes to between 40 and 50 metres below seabed. The boreholes were carried out as a combination of rotary, percussion and core drilling. In addition to the sampling, in-situ testing (SCP, PCPT, P-S logging and HPD tests) were carried out in the boreholes. The CPT campaign includes in total 82 PCPT tests. All the PCPT's were planned to penetrate to 25m below seabed. On the majority of the test locations this target depth was not reached due to soil conditions. Origin: GEO (Danish Geotechnical Institute) There will be no limitations when published on the Marine Data Exchange otherRestrictions Data Must be used in accordance to the Marine Data Exchange's Terms of Use: https://www.marinedataexchange.co.uk/content/info/terms-of-use otherRestrictions The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk custodian Danish Geotechnical Institute (GEO) +45 4588 4444 geo@geo.dk originator The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk distributor Orsted info@orsted.com owner notPlanned Delimited Documents https://www.marinedataexchange.co.uk/details/TCE-901/summary A link to the web service or dataset. https://www.marinedataexchange.co.uk A link to the general host site. Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services 2010-12-08T00:00:00 publication Conformity with the Commission Regulation (EU) No 1089/2010 was either not relevant to this dataset or not a requirement of the Marine Data Exchange for the creation and submission of this dataset; therefore, conformity has not been assessed and cannot be declared False series On the instruction and under the supervision of RPS Energy, acting on behalf of Centrica Renewable Energy Limited a geotechnical investigation has been carried out by GEO (Danish Geotechnical Institute) at the location for the planned offshore wind farm at Lincs. Co-ordinates for all positions are given according to WGS84, UTM Zone 31, 3o East. All depths refer to the Chart Datum (CD). Two independent DGPS systems have provided surface positioning during the boring campaign. The preliminary positioning system was a Hemisphere MBX-4 (EGNOS) receiver. The secondary positioning systems was an Ashtech GPS 1 DGPS (IALA) receiver. Both systems are described in Report 2. When the platform was jacked up, the actual position was fixed and a “Final Positioning Report” was prepared in Navipac for each test location. The seabed elevation for the boring positions shown on the boring profiles have been based on the bathymetric survey previously performed by the Client. Key results from this survey are presented on the Centrica drawing 01515D6984-03. The water depths are relative to CD. In additions the depths to seabed have been monitored during the initial part of the drilling work to check the bathymetric data. Results from these control measurements are presented in Report 2. Positions and seabed elevations for the boreholes are given in the Summary – Boreholes, Enclosure 3B.02 and on the Borehole Logs, Enclosure Nos. 3D.LS01 through 3D.LSSUB. Centrica Renewable Energy Limited GIS and Data Manager 01753 492188 renewables@centrica.com pointOfContact EPSG Geodetic Parameter Registry 2022-12-12 revision WGS 84 / UTM zone 31N