62d210c0-11e5-4c86-9c0b-ee24fccc6245 English series series 2026-03-04T12:45:54 MEDIN 3.1.2 geoscientificInformation oceans society Seismic reflection SeaDataNet Parameter Discovery Vocabulary 2023-12-12 revision Seismic refraction SeaDataNet Parameter Discovery Vocabulary 2023-12-12 revision Marine archaeology SeaDataNet Parameter Discovery Vocabulary 2023-12-12 revision Side-scan sonar SeaDataNet Parameter Discovery Vocabulary 2023-12-12 revision Magnetics SeaDataNet Parameter Discovery Vocabulary 2023-12-12 revision Bathymetry and Elevation SeaDataNet Parameter Discovery Vocabulary 2023-12-12 revision Post-Construction monitoring The Crown Estate Renewable Energy Development Phases 2012-05-15 revision Operation and Maintenance The Crown Estate Renewable Energy Development Phases 2012-05-15 revision Renewable Energy Lease area The Crown Estate Renewable Energy Development Areas 2012-05-15 revision Elevation GEMET - INSPIRE themes, version 1.0 2009-07-31 revision Geology GEMET - INSPIRE themes, version 1.0 2009-07-31 revision SeaDataNet sea areas 2012-11-07 revision North Sea SeaVoX Vertical Co-ordinate Coverages 2020-05-21 revision water column 2017-07-23T23:00:00 2017-07-30T23:59:59 -1.127 -1.061 54.634 54.654 TCE-2057 Marine Data Exchange 2017, Bibby HydroMap, Teesside, Geophysical Surveys Geophysical Surveys 2016-06-07T00:00:00 creation 2021-11-10T16:50:04 publication 2016-06-08T00:00:00 revision English Bibby HydroMap were commissioned by EDF Energy Renewables, in July 2017, to undertake a 350m x 350m debris survey around turbine 14B on the Teesside Offshore Wind Farm (OWF), prior to the emplacement of a jack‐up rig on the site. Once mobilised, the client also requested a further survey of the remainder of the wind farm site. The location of the windfarm is presented in Figure 1, below and the relevant turbine identified. The survey was completed under Bibby HydroMap’s Terms and Conditions and was carried out between 24/07/2017 and 30/07/2017. The main objective of the surveys was to identify any object or conditions, which may constrain the emplacement of the jack‐up rig. Once published, there will be no limitations on public access. Data must be used in accordance with the Marine Data Exchanges Terms of Use which can be found on the website. otherRestrictions Once published, there will be no constraints on public access. Data must be used in accordance with the Marine Data Exchanges Terms of Use which can be found on the website. otherRestrictions The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk custodian Matthew Shenton Bibby HydroMap Ltd CAD/GIS Technician matt.shenton@bibbyhydromap.com originator The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk distributor EDF Energy Renewables Info@edf-re.com owner biannually Database Documents Geographic Information System https://www.marinedataexchange.co.uk/details/TCE-2057/summary A link to the web service or dataset. https://www.marinedataexchange.co.uk A link to the general host site. Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services 2010-12-08T00:00:00 publication Conformity with the Commission Regulation (EU) No 1089/2010 was either not relevant to this dataset or not a requirement of the Marine Data Exchange for the creation and submission of this dataset; therefore, conformity has not been assessed and cannot be declared False series Data acquisition was undertaken from Bibby HydroMap’s own dedicated shallow draft vessel MV Proteus of Liverpool, equipped with Reson T20‐P multibeam echo sounder, Edgetech 4200MP side scan sonar, GeoAcoustics 2‐pot pinger, G882 magnetometer, Applanix POS MV IMU and C‐Nav 3050. The weather conditions onsite have been favourable during the survey. The prevailing wind direction and resulting wind waves for the duration of the survey were from the south‐south west sector. Tidal currents were negligible. System Configuration: MBES – Settings were tuned during mobilisation and left unchanged for the duration of the survey, except for the coverage angle and beam steering. SSS – The range of the SSS was set to 75m to achieve the required 125% overlap which meant that the SSS was flown at 7.5m above the seabed. Additional Information: Survey was unaffected by tides. A safe distance was kept from fixed structures during all stages of acquisition. Primary GNSS positioning was provided by a C‐Nav 3050G GNSS system using the C‐NavC2 correction service. The C‐Nav system is a globally available Satellite Based Augmentation System (SBAS) using Precise Point Positioning (PPP) techniques that offer accuracies of 0.08m XY and 0.15m Z RMS. Secondary GNSS positioning was provided by a Hemisphere Vector VS330 GNSS Compass. The VS330 system delivers sub‐metre dGPS positioning accuracy, when using decoded correction data. The VS330 system was set to receive differentially corrected data from the Space Based Augmentation System (SBAS) European GPS Navigation Overlay System (EGNOS). ABP Marine Environmental Research Ltd 02380711840 enquiries@abpmer.co.uk pointOfContact EPSG Geodetic Parameter Registry 2022-11-29 revision WGS 84