b6355009-4764-471f-ac88-ad54e7f9ddb8 English series series 2026-07-28T11:53:03 MEDIN 3.1.2 geoscientificInformation Geotechnics SeaDataNet Parameter Discovery Vocabulary 2026-06-19 revision Pre-Construction monitoring The Crown Estate Renewable Energy Development Phases 2012-05-15 revision Agreement for Lease Area The Crown Estate Renewable Energy Development Areas 2012-05-15 revision Geology GEMET - INSPIRE themes, version 1.0 2009-07-31 revision SeaDataNet sea areas 2012-11-07 revision Irish Sea and St. George's Channel SeaVoX Vertical Co-ordinate Coverages 2020-05-21 revision soil and sediment 2005-03-18T00:00:00 2005-03-26T23:59:59 -3.76607548419802 -3.45407035095433 53.4073128575686 53.504544505898 TCE-592 Marine Data Exchange 2005, Seacore, Gwynt y Mor, Preliminary Geotechnical Site Investigation Preliminary Geotechnical Site Investigation 2022-10-11T14:05:04 publication English Seacore were commissioned by npower renewables Ltd to undertake preliminary geotechnical site investigation work at the Gwynt y Môr offshore wind farm site. There will be no limitations when published on the Marine Data Exchange otherRestrictions Data Must be used in accordance to the Marine Data Exchange's Terms of Use: https://www.marinedataexchange.co.uk/content/info/terms-of-use otherRestrictions The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk custodian Fugro Seacore info@seacore.com originator The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk distributor RWE support@rwe.com owner notPlanned Geographic Information System https://www.marinedataexchange.co.uk/details/TCE-592/summary A link to the web service or dataset. https://www.marinedataexchange.co.uk A link to the general host site. Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services 2010-12-08T00:00:00 publication Conformity with the Commission Regulation (EU) No 1089/2010 was either not relevant to this dataset or not a requirement of the Marine Data Exchange for the creation and submission of this dataset; therefore, conformity has not been assessed and cannot be declared False series Copilot said: The fieldwork was performed 24 hours a day in two 12 hour shifts using the Seacore jack-up platform Excalibur. This platform has been specifically designed by Seacore to meet the requirements of site investigations and marine construction in nearshore and offshore environments. The platform consists of a 60m x 32m x 4.24m barge with 8 legs mounted through the hull. The legs are raised and lowered on jacking units comprising an upper and lower bearing. Each bearing clasps the surface of the legs using a pneumatic gripper system, and raise or lower the legs through the hull by extending or retracting the upper and lower bearings apart or together. Each leg is 50m long and the platform is capable of working at a maximum separation of 40m. For safety purposes two Offshore Rigid Inflatable Boats (RIBs) were permanently housed on board the vessel which could be rapidly deployed using a 5.0 tonne deck crane in the event of an emergency. A number of self-inflating life rafts were located around the vessel. The vessel is also equipped with a comprehensive suite of navigation and communications systems, including GMDSS, VHF, Inmarsat, and NAVTEX. Provide your feedback on BizChat The Crown Estate +44 020 7851 5000 enquiries@thecrownestate.co.uk pointOfContact EPSG Geodetic Parameter Registry 2022-11-29 revision WGS 84